Intelligent lighting for the modern Malaysian home.
Zenso Smart Switch is a universal dual-wiring Zigbee 3.0 switch that fits any house — with or without neutral. Local mesh, voice control, and scenes that keep running even when the Wi-Fi goes down.
Works with or without a neutral wire
Zigbee 3.0 local mesh, self-healing network
Matte white & graphite, tempered glass
About the Zenso Smart Switch.
The Zenso Smart Switch is a Zigbee 3.0 lighting control built for the way homes are actually wired in Malaysia. Whether your house is a new build with a neutral wire at every switch box, or an older home with only live and load, the same smart switch fits — no separate modules, no capacitor guesswork on the standard gangs, and no flickering LEDs.
Because it runs on Zigbee 3.0 instead of Wi-Fi, every Zenso Smart Switch joins a local mesh network. Each switch quietly extends the range of the next, and your scenes and schedules keep firing even when the internet drops or the router restarts. That local-first design is what makes a smart home feel reliable instead of frustrating.
Setting up is simple: pair the smart switch to a Zenso Gateway or any Zigbee 3.0 hub, then control it from the Zenso app or by voice through Google Home and Amazon Alexa. Build a “Movie night” scene, let the porch light follow the sunset, or switch everything off as you leave — all from your phone, from anywhere.
Every Zenso Smart Switch is finished in tempered glass, comes in Black or White, and is available in 1 to 4 gang versions so you can match the exact number of circuits in each room. The whole range is SIRIM and Suruhanjaya Tenaga (ST) approved and meets IEC and Singapore Safety Mark standards — so you are installing a smart switch that is certified and safe for Malaysian homes.
Built for real Malaysian wiring.
Old house or new, neutral or no neutral — one switch that just fits, and keeps working when the internet doesn’t.
Dual-wiring, any house
Fits both neutral and no-neutral wiring found in older and newer homes. No capacitor tricks, no LED flicker.
Local mesh that survives Wi-Fi
Runs on Zigbee 3.0. Scenes and schedules keep firing even when your router is down or the internet drops.
Voice & app control
Works with Google Home and Amazon Alexa. Control every switch from anywhere in the Zenso app.
Scenes & schedules
“Movie night”, “Leaving home”, sunset automation — set it once and let the house run itself.
Two finishes, four sizes.
Black or White — same tempered-glass panel, same app across the line. Pick from 1 to 4 gang for the number of circuits you need.
How to pair your switch.
A quick walkthrough of adding your Zenso Smart Switch to the app and your Zigbee hub.
Wiring diagrams.
With or without neutral — pick your gang to see the exact connections. Tap a diagram to open it full-size. Wiring involves mains power, so always use a licensed electrician.
Note: The “without neutral” method needs an X2-type capacitor (0.47µF / 275V~), supplied where required. Incorrect wiring can cause flicker or damage — installation by a qualified electrician is recommended.